Step 10 - Analyzing Your PopAds Campaigns using BeMob

[pmahes]

Hey guys, so it looks like the numbers don't match up between BeMob and Mobipium for me. There's also zero clicks showing on BeMob. What could be the issue here

 

[Luke]

Hey guys, so it looks like the numbers don't match up between BeMob and Mobipium for me. There's also zero clicks showing on BeMob. What could be the issue hereView attachment 10741View attachment 10742

Visits are what you are looking for. Clicks are for if you are using your own landing page. You are not using your own LP. You are direct linking.

There will always be a difference between your clicks your affiliate network shows and your tracker. @TheOptimizer.io explained this really well here:

Click loss network and tracker

afflift.com

 

[pmahes]

Visits are what you are looking for. Clicks are for if you are using your own landing page. You are not using your own LP. You are direct linking.

There will always be a difference between your clicks your affiliate network shows and your tracker. @TheOptimizer.io explained this really well here:

Click loss network and tracker

afflift.com

Gotcha!

So would visitors in bemob and clicks in mobipium represent the same thing?

Also, what about the difference in conversions - bemob shows 11 and mobipium shows 17?

Thanks for your time

 

[Luke]

So would visitors in bemob and clicks in mobipium represent the same thing?

Yes

Also, what about the difference in conversions - bemob shows 11 and mobipium shows 17?

That is a good question. My assumption would be that BeMob and MOBIPIUM are on different timezones. Try running the reports for the entire time you've run the campaign and update the timezones.

 

[pmahes]

Yes


That is a good question. My assumption would be that BeMob and MOBIPIUM are on different timezones. Try running the reports for the entire time you've run the campaign and update the timezones.

Hm, looks like they're both in the same timezone. Any other ideas as to why the # of conversions are different?

 

[Luke]

Hm, looks like they're both in the same timezone. Any other ideas as to why the # of conversions are different?

Did you change your postback at any point? Or update the offer?

 

[Akahma]

for clickloss its normal when running pops, about a conversion numbers, it may be delayed for some time. so check your status after anther day if it persist , with you change any thing As @Luke said about offer or postback , you should check it with your MOBIPIUM AM

 

[ayoub19]

I think because of that you don't use a landing page in campaign right?

 

[pmahes]

Did you change your postback at any point? Or update the offer?

I spoke to both my AM at mobipium and support at Bemob.

On mobipium side, it looks like everything is fine. They provided me with the clickid report which I gave to support at Bemob and they said that 4 conversions can't be uploaded because they don't have a valid clickid and another 2 conversions can't be uploaded because "there's no such visit on my account." Not sure what happened to cause this but I'm going to setup the tracking from scratch and run another campaign. Hopefully the issue is fixed the second time around.

 

[Akahma]

you don't have to resetup , just run your report for the other day and check if there is more conversion loss/ miss

 

[pmahes]

you don't have to resetup , just run your report for the other day and check if there is more conversion loss/ miss

You're right - I'll try that! Thank you

 

[ayoub19]

Also, I try Today campaign mobipium with bemob on mobipium currently I have 60 conversion but on bemob 0, I don't Know why

 

[Akahma]

can you send a screen shoot of your /setup for both affiliate network/ tracker. postback url part

 

[ayoub19]

can you send a screen shoot of your /setup for both affiliate network/ tracker. postback url part

this statistics with 3 offer running ( 2 SmartLink offer )

 

[Meow]

@Luke and calling all experts. Please chime in.
BeMob's dashboard has a result but KPI does not show.
What did I do wrong here?
Thank you in advance!

 

[Luke]

this statistics with 3 offer running ( 2 SmartLink offer )

You need to add cid in the second box like I showed in the guide here:

Step 7 - Add our BeMob Postback to MOBIPIUM

afflift.com

@Luke and calling all experts. Please chime in.
BeMob's dashboard has a result but KPI does not show.
What did I do wrong here?
Thank you in advance!

This is likely just because BeMob and MOBIPIUM are on different timezones. You can set your timezone in BeMob settings to GMT+1 if you want them to match:

 

[mannypete]

Hi
What would be the reason for getting conversions and costs but not receiving revenue
conversions 11
Revenue $0.04
Cost $0.26
I would have thought revenue would have been alot higher

 

[Luke]

Hi
What would be the reason for getting conversions and costs but not receiving revenue
conversions 11
Revenue $0.04
Cost $0.26
I would have thought revenue would have been alot higher

If you go to your campaign in BeMob and click on Conversions you can see the revenue for each conversion:

It's likely you are getting low value conversions for smaller t3 GEOs.

 

[Meow]

You need to add cid in the second box like I showed in the guide here:

Step 7 - Add our BeMob Postback to MOBIPIUM

afflift.com

This is likely just because BeMob and MOBIPIUM are on different timezones. You can set your timezone in BeMob settings to GMT+1 if you want them to match:

View attachment 10877

Luke, Thank you
also, once I changed that, it still didn't update or Do I have to have for the next data to come in?
I contacted my AM but didn't respond. Thank you much Luke.

 

[mannypete]

Luke, Thank you
also, once I changed that, it still didn't update or Do I have to have for the next data to come in?
I contacted my AM but didn't respond. Thank you much Luke.

Meow,

You have to do another campaign once you input Cid, I made the same mistake the results from the campaign from without Cid will be showing as errors in mebob