ProPush.Me is a platform for monetizing traffic with push subscriptions
for affiliates and webmasters

Step 11 - Optimizing our Campaign

That's what I would start with for each one, yes ๐Ÿ‘
Hi @Luke . So, after analyzing the data in BeMob, I created a Campaign in PopAds for Saudi Arabia with OS as Android 11, browser as Google Chrome 94 and 95, formfactor as smartphone, and 5 website ids which were performing well. I kept maximal bid as 0.00033 and budget as 5.
Summary looks like below.


The problem I am facing is that in last more than 12 hours, after campaign approval, only $0.08 is used out of $5 daily budget. Why it might be?
 
Try ClickDealer
Hi @Luke . So, after analyzing the data in BeMob, I created a Campaign in PopAds for Saudi Arabia with OS as Android 11, browser as Google Chrome 94 and 95, formfactor as smartphone, and 5 website ids which were performing well. I kept maximal bid as 0.00033 and budget as 5.
Summary looks like below.
View attachment 22548

The problem I am facing is that in last more than 12 hours, after campaign approval, only $0.08 is used out of $5 daily budget. Why it might be?
View attachment 22549
The issue is you are bidding too low. You are position 22 as it says. If you're going to run a whitelist campaign (which is what you are doing), you will want to bid higher so you can get a high position and more of the traffic.
 
The issue is you are bidding too low. You are position 22 as it says. If you're going to run a whitelist campaign (which is what you are doing), you will want to bid higher so you can get a high position and more of the traffic.

So you should bid for number 1 to see if the offer converts? Or at least above 10?

What would a good guideline be? If the offer is $4.00, how much would you budget to see a conversion and at what minimum position?
 
Last edited:
The issue is you are bidding too low. You are position 22 as it says. If you're going to run a whitelist campaign (which is what you are doing), you will want to bid higher so you can get a high position and more of the traffic.
Thanks @Luke .
1. When I ran the campaign first time for whole world the position was much lower but I got traffic. In your screenshot also position is 191. So, how exactly it works?
2. Where can I read more about bidding, whitelisting campaign etc. ?
3.What should I do now?
 
Last edited:
1. When I ran the campaign first time for whole world the position was much lower but I got traffic. In your screenshot also position is 191. So, how exactly it works?
Yeah, you were targeting the whole world the first time and now you've narrowed it down. There will be less traffic and you will need to big higher.

2. Where can I read more about bidding, whitelisting campaign etc. ?
Try searching the forum for popads bid: https://afflift.com/f/search/?q=popads+bid&o=relevance

3.What should I do now?
Increase your bid.
 
Thanks Luke.
How to decide an ideal bid? When to increase, how much to increase?
Do we have a full thread/article on this in the forum?
I'm not sure if there's a thread on it, but I would bump it until you're getting traffic you're happy with.
 
I'm not sure if there's a thread on it, but I would bump it until you're getting traffic you're happy with.
So I ran the campaign for Saudi Arabia, with only the top performing OS and Browser. I still didnt get into any profit :-(

I had some +ve ROI website IDs in above campaign:


Today I ran the same Campaign again with the Website Ids that are +ve with budget of $5 and Maximal Bid of 0.5



But I am hardly getting any traffic. BeMob results since the running of Campaign today.


What mistake I am making?
Do you think i would be able to make +ve ROI :-( ?
 
How many conversions did you have in the campaign you used to determine the best o/s and browser? The screenshots you're showing don't show much in the way of visits or conversions. Real tough to make decisions with that little of info. Personally, I never make a decision based on 1 conversion in a zone.
 
But I am hardly getting any traffic. BeMob results since the running of Campaign today.


What mistake I am making?
Do you think i would be able to make +ve ROI :-( ?



You aren't getting any traffic because the websites you are targeting do not have much traffic and you've over optimized.
 
ok. What next then? Shall I run the campaign again for Worldwide and get more data?
Is there a follow up on this interesting thread? what happens when you don't get traffic because of over optimizing campaign?
should we kill it and start from scratch?
 
Is there a follow up on this interesting thread? what happens when you don't get traffic because of over optimizing campaign?
should we kill it and start from scratch?
I wasn't getting a positive roi so killed it but then I started it for a GEO which had good traffic but there also I got +ve roi only for day. So had to kill that as well. Not sure if smartlinks can really be made profitable or not but I couldn't make it but I learnt the use of tracking tool. Maybe this tutorial is meant more for learning than for +ve earning :)
 
Is there a follow up on this interesting thread? what happens when you don't get traffic because of over optimizing campaign?
should we kill it and start from scratch?
I wasn't getting a positive roi so killed it but then I started it for a GEO which had good traffic but there also I got +ve roi only for day. So had to kill that as well. Not sure if smartlinks can really be made profitable or not but I couldn't make it but I learnt the use of tracking tool. Maybe this tutorial is meant more for learning than for +ve earning :)
Next step is to apply what you've learned to a bigger campaign. For example, our Intermediate Course can definitely give you "bigger" results :)
 
I m trying to adjust a camping but popsad is complaining "CSRF protection in effect", that I am using a different system. Which is not so. Although I checked the platform from my phone but now I want to work from system. Please how do I clear this error message
 
I m trying to adjust a camping but popsad is complaining "CSRF protection in effect", that I am using a different system. Which is not so. Although I checked the platform from my phone but now I want to work from system. Please how do I clear this error message
Checking with PopAds on this and will let you know ๐Ÿ‘
 
I have read through this step today.
But unfortunately for me, I am not able to see conversions in beMob, although I did see about 90+ conversions in mobipium.
I followed every step in this guide and have no idean why it's not working.
see below 2 pictures:
 

Attachments

  • bemob-no-conversion.jpg
    bemob-no-conversion.jpg
    72.6 KB · Views: 34
  • mobipium-got-conversion.jpg
    mobipium-got-conversion.jpg
    51.1 KB · Views: 25
Top